W tej zakładce znajdą Państwo case studies naszych rozwiązań: opisy aplikacji, materiały video i galerie zdjęć. Zapraszamy!


In this tab you can find case studies of our solutions: application descriptions, videos and photo galleries. Welcome!

Universal capper for trigger, cosmetic pump, pull-push and flip-top caps

Trigger and cosmetic pumps capping machine (caps are manually fed to the feeder) with two capping stations increasing process productivity: Z6 (gripper for triggers or pumps) and Z5 - capping of preliminarily inserted closures.

, , ,

A more developed version of our Z6 is equipped with an extra Z5 capping module which allows for an increase in the capping process productivity up to 30 pcs./min (compared to only 25 pcs./min in the Z6).

Watch a movie


The challenge:

The challenge we faced was connected mainly with the package:

  • Low quality bottles, prone to being crushed during separation under pressure or during feeding with various hardness and wall thicknesses.
    During capping, soft packages get easily deformed pushing out air and may get labeled incorrectly: bubbles, wrinkles, etc.
  • Closures specificity: triggers (long straw) and cosmetic pumps (short straw).  With longer straws, there is more time for opening the scissors.  With shorter straws (pumps), gripper lowering time is shorter and scissors opening time gets longer.
  • Low quality closures:
    A pump is positioned on Z2 (pump nozzle orientation is set for the bottles to enter oriented in the same direction).



  • Extra bottle stabilizing belts to release line pressure have been added.
  • Depending on Client’s closure quality, we have enabled two modes of pump capping and orienting: capping and then positioning or reversely – depending on pump quality.
    The first mode (capping and positioning) provides lower productivity (slower machine work due to the need of performing an extra turn).


If you are interested in similar solutions, please contact our Sales Department.

Please find below our Z6 videos and photo gallery.

Need a QUOTATION or an advice?

Upload your PRODUCTS PHOTO & fill in the form

  • Upload the photo jpg, png or tiff file

Specialist support

Adam Dybaś Sales Manager

+48 697 180 380

Need a QUOTATION or an advice? Upload your PRODUCTS PHOTO & fill in the form Need a QUOTATION? Fill in the form
Informujemy o realizacji projektu pt. „Zrobotyzowana uniwersalna linia technologiczna do konfekcjonowania produktów branż: kosmetycznej, farmaceutycznej i chemicznej” współfinansowanego ze środków Europejskiego Funduszu Rozwoju Regionalnego w ramach Poddziałania 1.1.2. „Prace B+R związane z wytworzeniem instalacji pilotażowej/demonstracyjnej”, Programu Operacyjnego Inteligentny Rozwój 2014-2020.

Find out the solutions for your industry

  • Watch more machinery videos
  • Order printed catalog and samples of labels
  • Find out your competitors solutions
  • Download the manual of labeller settings and designing the labels

Leave e-mail to get access to the full version of the site

privacy policy

Thank you for your interest in the content of our site

After verification of you request, you will receive full access to content within 24 hours


Właśnie uzyskałeś dostęp do pełnej wersji serwisu. Dziękujemy i życzymy miłej lektury.